GEAR MOTOR MR 752 L 52

MR752L52

 MR75252 2

 

TYPE  RATIO  L
mm		 *R.P.M. no load
min-1
 *R.P.M. S 1
min-1		 S1 Torque
Nm
*R.P.M. S2
min-1 		 S2 Torque
Nm
 Max Torque
Nm		 I max
24 Vdc 
MR 752 L 52 1/4 4 152 760 660 0,5 450 1,3 3 14,5
MR 752 L 52 1/6 6 159 300 440  0,7 310 2 5 14,5
MR 752 L 52 1/16 16 167 185 165 1,7 115 4,8 12,2 14,5
MR 752 L 52 1/24 24 167 120 105 2,5 75 7,2 18,7 14,5
MR 752 L 52 1/36  36 174 80 70 4 55 11 28 14,5
MR 752 L 52 1/64  64 184 45 36 6 26 17 43 14,5
MR 752 L 52 1/96  96 191 30 25 9 18 25 65 14,5

 

Length "L" of the gearmotor as a funtion of reduction and output number of revolution with the standard motor
752 L 60 output W 3200 Rpm loadness, 12 or 24 Vdc. Starting corrent 14,5 A. (28A x 12Vdc)
 
Output shaft is supported by two coupled screened bearings.
The motor has an electrical suppressor system for the CE standard.
The motor’s surface and reducer’s surface are both plated to avoid corrosion.
Connecting wires 0,75 x 250 mm.
 
*The speed rotation can change of ±10%.
 
The S1 load test was made using a (2,5 A) corrent in the air with an increase of temperature of 70° C.
The S2 test was made using a (6 A) corrent in the air with a 50% timing 5' with an increase of temperature
of 80° C max. The starting corrent is (I max) and must not mantained for more than 2".
 
Max load on the extremity of output shaft: Axial 200 N, Radial 300 N
 
It is possible to apply an encoder.