GEAR MOTOR MR 724 20
TYPE | RATIO | L mm |
*R.P.M. no load *min-1 |
*R.P.M. S2 *min-1 |
S2 Torque Nm |
Max Torque Nm |
I max 24 Vdc |
MR 724 20 1/16 | 16 | 62 | 620 | 280 | 0,11 | 0,2 | 1,6 |
MR 724 20 1/64 | 64 | 70 | 155 | 70 | 0,44 | 0,8 | 1,6 |
MR 724 20 1/256 | 256 | 78 | 39 | 17 | 1,2/0,5A | 1,5 | 0,7 |
Length "L" of the gearmotor as a function of reduction and output number of revolution with the standard motor 724,
output 5 W, 12000 Rpm loadness, 12 or 24 Vdc. Starting corrent 1,6 A. (3A x 12 Vdc)
Output shaft supported by self lubrifilating bushing.
The motor’s surface is plated to avoid corrosion. The material of gearbox’s surface is delrin.
The motor’s surface is plated to avoid corrosion. The material of gearbox’s surface is delrin.
* The rotation speed can change of ±10%.
The test was made using a (0,85 A) current with a timing 3' ON 6' OFF.
The starting corrent is I max and must not maintained for more than 2''.
The starting corrent is I max and must not maintained for more than 2''.
Max. load on the extremity of output shaft: Axial 2 N, Radial 10 N