GEAR MOTOR MVSF 863 L 26
TYPE | RATIO | R.P.M. no load *min-1 |
R.P.M. S 1 *min-1 |
S1 torque Nm |
R.P.M. S2 *min-1 |
S2 torque Nm |
Max torque Nm |
I max 24 Vdc |
MVSF 763 L 26 1/10 | 10,5 | 330 | 290 | 1,6 | 220 | 4 | 11 | 25 |
MVSF 763 L 26 1/15 | 15,5 | 215 | 185 | 2,8 | 150 | 6 | 19 | 25 |
MVSF 763 L 26 1/20 | 21 | 165 | 140 | 3,5 | 110 | 8 | 20 | 21 |
MVSF 763 L 26 1/30 | 31 | 105 | 90 | 4 | 70 | 9 | 20 | 19 |
MVSF 763 L 26 1/40 | 39 | 80 | 70 | 5 | 55 | 10,5 | 24 | 19 |
Worm geared motor and standard motor Ø 63 12 or 24 Vdc 3300 RPM loadness 110W. Starting corrent 25 A.
Driving shaft mounted with on 2 ball bearings Output shaft supported by two ball bearing with oil splash guard
on output side.
on output side.
Connecting wires 0,75 x 200 mm.
*The rotation speed can change of ±10%.
The S1 load test was made using a (I 4,5 A) current in the air with an increase of temperature of 70°.
The S2 test was made using (9 A) current in the air with a 50% timing 5’ with an increase of temperature
of 80° max.
The S2 test was made using (9 A) current in the air with a 50% timing 5’ with an increase of temperature
of 80° max.
The starting current is (I max) and cannot be maintained for more than 2".
Max load on the extremity of output shaft: Axial 250 N, Radial 400 N.
It is possible to apply an encoder.