GEAR MOTOR MVSF 756 L 26

MVSF756L26 ok

MVSF75226 2

 

TYPE  RATIO

R.P.M.

no load
*min-1
 R.P.M. S 1
*min-1
S1 torque
Nm

R.P.M. S2
*min-1 
S2 torque
Nm
Max torque
Nm
I max
24 Vdc 
MVSF 756 L 26 1/10 10,5 310 275 1 220 1,5 7 22
MVSF 756 L 26 1/15 15,5 200 175 1,5 135 3,7 12 22
MVSF 756 L 26 1/20 21 155 135 1,7 110 4 13 22
MVSF 756 L 26 1/30 31 100 90 2,2 70 5 16 22
MVSF 756 L 26 1/40 39 80 70 2,6 55 6 20 22

 

Worm geared motor screw and standard motor Ø 56 12 or 24 Vdc 3200 RPM loadness 90W. Starting corrent 22 A.(42A x 12Vdc)

Driving shaft mounted with on a bearing and bushing. Output shaft supported by two bearing with oil splash guard on output side.
Connecting wires 0,75 x 200 mm.
 
*The rotation speed can change of ±10%.
 
The S1 load test was made using a (3 A) current in the air with an incease of temperature of 70°.
The S2 test was made using (7 A) corrent in the air with a 50% timing 5’ with an increase of temperature of 80° max.
The starting corrent is (I max) and must not maintained for more than 2".
 
Max load on the extremity of output shaft Axial 250 N, Radial 400 N.
 
It is possible to apply an encoder.