Worm gearboxes screw and standard motor Ø B63 24 Vdc 3100 RPM loadness 130 W. Starting
current: see table I max.
Driving shaft mounted on 2 ball bearings.
Output shaft supported by 2 ball bearings with oil seal on output side.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wires x 1 mm2 l 300 mm.
* Rpm can change of ±10%.
The S1 load test was made using a 5 A current in the air with an increase of temperature of 70°.
The S2 test was made using 10 A current in the air with a 50% timing 5’ with an increase of temperature
of 80° max.
The starting current (I max) must not maintained for more than 2”.
Max load on the extremity of output shaft: Axial 250 N, Radial 400 N.
Bernio’s experience in gearmotors translates into stable, reliable products that are easy to manage on the field. Each component is developed and validated in Italy according to strict industrial standards. The outcome is a solid, precise power transmission suitable for high-intensity production environments.
Main features:
- Quality checks performed on every production batch.
- Compact solutions engineered for easy integration into existing machines.
- Stable performance even with frequent starts and stops.
- Torque available already at low speed ranges.
- Gear units conceived to minimize unplanned downtime.
MVSF B63 L 26
Worm gearboxes screw and standard motor Ø B63 24 Vdc 3100 RPM loadness 130 W. Starting current: see table I max.
| Type |
Ratio | *R.P.M. No load *min-l |
*R.P.M. S1 min-l |
Torque S1 Nm |
*R.P.M. S2 *min-l |
S2 Torque Nm |
Max Torque Nm |
I Max 24 Vdc |
|---|---|---|---|---|---|---|---|---|
| MVSF B63 L26 1/10 | 10,5 | 300 | 270 | 1,8 | 235 | 4,2 | 20 | 45 |
| MVSF B63 L26 1/15 | 15,5 | 200 | 180 | 2,8 | 160 | 7,5 | 20 | 25 |
| MVSF B63 L26 1/20 | 21 | 150 | 135 | 3,5 | 120 | 8 | 20 | 25 |
| MVSF B63 L26 1/30 | 31 | 100 | 90 | 4 | 80 | 9,5 | 20 | 20 |
| MVSF B63 L26 1/40 | 39 | 75 | 66 | 6 | 64 | 8,5/7 A | 18 | 14 |