it
Download PDF catalogue
Product Description
Worm gearboxes and standard motor Ø 42 12 or 24 Vdc 3700 RPM loadness 30 W. Starting current 6
A (11 A x 12 Vdc). The data sheet refers to the version 24Vdc.
Driving shaft mounted on a bearing and a bushing.
Output shaft supported by 2 bearings with oil seal on the output side.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wires x 0,75 mm2 L 250 mm.
* Rpm can change of ± 10%.
The S1 load test was made using a 1,6 A current in the air with an increase of temperature of 70 C°.
The S2 test was made using a 3 A current in the air with a 50% timing 5' with an increase of temperature
of 80 C° max.
The starting current (I max) must not maintained for more than 2".
Max load on the extremity of output shaft: Axial 250 N, Radial 400 N.
It is possible to apply encoder.
A (11 A x 12 Vdc). The data sheet refers to the version 24Vdc.
Driving shaft mounted on a bearing and a bushing.
Output shaft supported by 2 bearings with oil seal on the output side.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wires x 0,75 mm2 L 250 mm.
* Rpm can change of ± 10%.
The S1 load test was made using a 1,6 A current in the air with an increase of temperature of 70 C°.
The S2 test was made using a 3 A current in the air with a 50% timing 5' with an increase of temperature
of 80 C° max.
The starting current (I max) must not maintained for more than 2".
Max load on the extremity of output shaft: Axial 250 N, Radial 400 N.
It is possible to apply encoder.
MVSF 742 26
742 26
Worm gearboxes and standard motor Ø 42 12 or 24 Vdc 3700 RPM loadness 30 W. Starting current 6 A (11 A x 12 Vdc). The data sheet refers to the version 24Vdc.
Datasheet
| Type |
Ratio | *R.P.M. No load *min-l |
*R.P.M. S1 min-l |
Torque S1 Nm |
*R.P.M. S2 *min-l |
S2 Torque Nm |
Max Torque Nm |
I Max 24 Vdc |
|---|---|---|---|---|---|---|---|---|
| MVSF 742 26 1/10 | 10,5 | 340 | 265 | 0,5 | 190 | 1 | 2,3 | 6 |
| MVSF 742 26 1/15 | 15,5 | 220 | 180 | 0,8 | 120 | 1,9 | 4 | 6 |
| MVSF 742 26 1/20 | 21 | 165 | 130 | 1 | 90 | 2 | 4,5 | 6 |
| MVSF 742 26 1/30 | 31 | 110 | 90 | 1,1 | 65 | 2,5 | 5,5 | 6 |
| MVSF 742 26 1/40 | 39 | 90 | 72 | 1,3 | 50 | 2,9 | 6,5 | 6 |
| MVSF 742 26 1/50 | 50 | 70 | 55 | 1 | 40 | 2,2 | 5 | 6 |
| MVSF 742 26 1/70 | 69 | 50 | 40 | 1,3 | 27 | 3 | 6,5 | 6 |
2D Drawing
