it
Download PDF catalogue
Product Description
Worm gearboxes and standard motor Ø 52 12 or 24 Vdc 2000 RPM loadness 45 W. Starting current 6
A (11 A x 12Vdc). The data sheet refers to the version 24Vdc.
Driving shaft mounted on a bearing and a bushing.
Output shaft supported by 2 bearing with oil seal guard on output side.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wires x 0,75 mm2 L 250 mm.
* Rpm can change of ±10%.
The S1 load test was made using a 1,8 A current in the air with an incease of temperature of 70°.
The S2 test was made using 2,9 A current in the air with a 50% timing 5’ with an increase of temperature
of 80° max.
The starting current (I max) must not maintained for more than 2".
Max load on the extremity of output shaft: Axial 250 N, Radial 400 N.
It is possible to apply an encoder.
A (11 A x 12Vdc). The data sheet refers to the version 24Vdc.
Driving shaft mounted on a bearing and a bushing.
Output shaft supported by 2 bearing with oil seal guard on output side.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wires x 0,75 mm2 L 250 mm.
* Rpm can change of ±10%.
The S1 load test was made using a 1,8 A current in the air with an incease of temperature of 70°.
The S2 test was made using 2,9 A current in the air with a 50% timing 5’ with an increase of temperature
of 80° max.
The starting current (I max) must not maintained for more than 2".
Max load on the extremity of output shaft: Axial 250 N, Radial 400 N.
It is possible to apply an encoder.
MVSF 752 26
752 26
Worm gearboxes and standard motor Ø 52 12 or 24 Vdc 2000 RPM loadness 45 W. Starting current 6 A (11 A x 12Vdc). The data sheet refers to the version 24Vdc.
Datasheet
| Type |
Ratio | *R.P.M. No load *min-l |
*R.P.M. S1 min-l |
Torque S1 Nm |
*R.P.M. S2 *min-l |
S2 Torque Nm |
Max Torque Nm |
I Max 24 Vdc |
|---|---|---|---|---|---|---|---|---|
| MVSF 752 26 1/10 | 10,5 | 215 | 155 | 1 | 120 | 1,5 | 3,5 | 6 |
| MVSF 752 26 1/15 | 15,5 | 140 | 100 | 1,5 | 80 | 2,4 | 6 | 6 |
| MVSF 752 26 1/20 | 21 | 105 | 75 | 1,8 | 60 | 2,8 | 6,5 | 6 |
| MVSF 752 26 1/30 | 31 | 70 | 50 | 2,2 | 40 | 3,4 | 8 | 6 |
| MVSF 752 26 1/40 | 39 | 55 | 40 | 2,8 | 30 | 4,5 | 10 | 6 |
2D Drawing
