Immagine MR 977 63

Product Description

Length "L" of the gearmotor as a function of reduction and output number of revolutions with the
standard motor 977 130 output W, 2900 Rpm loadness, 24 Vdc. Starting current 38 A.

Output shaft supported by two coupled screened bearings.
The motor’s surface and reducer’s surface are both zinc plated to avoid corrosion.
Connecting 2 wires x 1,5 mm2 L 300 mm.

* Rpm can change of ±10%.

The S1 load test was made using a 3,8 A current in the air with an increase of temperature of 70° C.
The S2 test was made using a 7,5 A current in the air with a 50% timing 5`with an increase of temperature
of 80° C max.
The starting current (I max) must not maintained for more than 2".

Max load on the extremity of output shaft: Axial 300 N, Radial 400 N.

MR 977 63
977 63

Length "L" of the gearmotor as a function of reduction and output number of revolutions with the standard motor 977 130 output W, 2900 Rpm loadness, 24 Vdc. Starting current 38 A.

Contact Us
Contact Us
Datasheet
Type
Ratio Lenght "L"
mm
*R.P.M. No load
*min-l
*R.P.M. S1
min-l
Torque S1
Nm
*R.P.M. S2
*min-l
S2 Torque
Nm
Max Torque
Nm
I Max
24 Vdc
MR 977 63 1/4 4 189 710 630 1 510 2,2 8 38
MR 977 63 1/6 6 189 480 430 1,5 350 3,4 12 38
MR 977 63 1/16 16 209 180 160 4 130 8,5 30 38
MR 977 63 1/24 24 209 120 105 6 88 12 45 38
MR 977 63 1/36 36 209 80 70 9 60 19 67 38
MR 977 63 1/64 64 229 45 40 13,5 32 30 102 38
MR 977 63 1/96 96 229 30 26 17 22 43 120 30
MR 977 63 1/144 144 229 20 17 26 15 52/6,5 A 120 18
MR 977 63 1/216 216 229 13,5 12 25/2,7 A 11,5 52/4,6 A 120 12
2D Drawing
Immagine MR 977 63