it
Access 3D content
Product Description
Length "L" of the gearmotor as a function of reduction and output number of revolutions with the
standard motor 742 30 output W, 3700 Rpm loadness, 12 or 24 Vdc. Starting current 5,5 A (11 A x
12Vdc).
Output shaft is supported by two coupled screened bearings.
The motor’s surface and reducer’s surface are both zinc plated to avoid corrosion.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wires x 0,75 mm2 L 250 mm.
* Rpm can change of ±10%.
The S1 load test was made using a 1,2 A current in the air with an increase of temperature of 70° C.
The S2 test was made using a 1,6 A current in the air with a 50% timing 5' with an increase of temperature
of 80° C max.
The starting current (I max) must not maintained for more than 2".
Max load on the extremity of output shaft: Axial 200 N, Radial 300 N.
It is possible to apply an encoder.
standard motor 742 30 output W, 3700 Rpm loadness, 12 or 24 Vdc. Starting current 5,5 A (11 A x
12Vdc).
Output shaft is supported by two coupled screened bearings.
The motor’s surface and reducer’s surface are both zinc plated to avoid corrosion.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wires x 0,75 mm2 L 250 mm.
* Rpm can change of ±10%.
The S1 load test was made using a 1,2 A current in the air with an increase of temperature of 70° C.
The S2 test was made using a 1,6 A current in the air with a 50% timing 5' with an increase of temperature
of 80° C max.
The starting current (I max) must not maintained for more than 2".
Max load on the extremity of output shaft: Axial 200 N, Radial 300 N.
It is possible to apply an encoder.
MR 742 45
742 45
Length "L" of the gearmotor as a function of reduction and output number of revolutions with the standard motor 742 30 output W, 3700 Rpm loadness, 12 or 24 Vdc. Starting current 5,5 A (11 A x 12Vdc).
Datasheet
| Type |
Ratio | Lenght "L" mm |
*R.P.M. No load *min-l |
*R.P.M. S1 min-l |
Torque S1 Nm |
*R.P.M. S2 *min-l |
S2 Torque Nm |
Max Torque Nm |
I Max 24 Vdc |
|---|---|---|---|---|---|---|---|---|---|
| MR 742 45 1/4 | 4 | 130 | 900 | 785 | 0,17 | 685 | 0,29 | 1,35 | 5,5 |
| MR 742 45 1/6 | 6 | 130 | 600 | 554 | 0,25 | 490 | 0,41 | 1,9 | 5,5 |
| MR 742 45 1/16 | 16 | 146 | 230 | 206 | 0,6 | 164 | 1,12 | 4,2 | 5,5 |
| MR 742 45 1/24 | 24 | 146 | 150 | 135 | 0,91 | 117 | 1,65 | 6,3 | 5,5 |
| MR 742 45 1/36 | 36 | 146 | 98 | 82 | 1,4 | 73 | 2,25 | 8,8 | 5,5 |
| MR 742 45 1/64 | 64 | 162 | 55 | 49 | 1,9 | 43 | 3,3 | 14 | 5,5 |
| MR 742 45 1/96 | 96 | 162 | 38 | 33 | 3,1 | 28 | 6,2 | 22 | 5,5 |
| MR 742 45 1/144 | 144 | 162 | 25 | 22 | 5,8 | 19,5 | 9,5 | 32 | 5,5 |
| MR 742 45 1/216 | 216 | 162 | 16,5 | 14 | 7,7 | 12,5 | 13,5 | 32 | 3 |
| MR 742 45 1/576 | 576 | 179 | 6,2 | 5,5 | 18 | 4,8 | 32 | 32 | 2,4 |
| MR 742 45 1/1296 | 1296 | 179 | 2,7 | 2,5 | 15/0,5 A | 2,4 | 20/0,65 A | 32 | 0,85 |
2D Drawing
