it
Download PDF catalogue
Product Description
Length “L” of the gearmotor as a function of reduction and output turns. Motor 737 have powers 10–20-
25 W, voltage 12 or 24 Vdc (version 737 H only 24 Vdc). This data sheet refers to the version 24 VDC.
Output shaft is supported by two screened bearings.
The motor’s surface and reducer’s surface are both zinc plated to avoid corrosion.
Permanent greasing.
The motor has an electrical suppressor system for the CE standard.
* Rpm can change of ±10%.
The S1 is continuos load test was made in the air with an increase of temperature of 70° C..
The S2 is intermittent (50% timing: 5' ON – 5' OFF) load test was made in the air an increase of temperature of 80° C max.
The starting current (I max) must not maintained for more than 2” (seconds).
Max load on the extremity of output shaft: Axial 300 N, Radial 400 N.
It is possible to apply an encoder.
25 W, voltage 12 or 24 Vdc (version 737 H only 24 Vdc). This data sheet refers to the version 24 VDC.
Output shaft is supported by two screened bearings.
The motor’s surface and reducer’s surface are both zinc plated to avoid corrosion.
Permanent greasing.
The motor has an electrical suppressor system for the CE standard.
* Rpm can change of ±10%.
The S1 is continuos load test was made in the air with an increase of temperature of 70° C..
The S2 is intermittent (50% timing: 5' ON – 5' OFF) load test was made in the air an increase of temperature of 80° C max.
The starting current (I max) must not maintained for more than 2” (seconds).
Max load on the extremity of output shaft: Axial 300 N, Radial 400 N.
It is possible to apply an encoder.
MR 737 35Q
737 35Q
Length “L” of the gearmotor as a function of reduction and output turns. Motor 737 have powers 10–20- 25 W, voltage 12 or 24 Vdc (version 737 H only 24 Vdc). This data sheet refers to the version 24 VDC.
Datasheet
| Type |
Ratio | Lenght "L" mm |
*R.P.M. No load *min-l |
Ampere S1 |
*R.P.M. S1 min-l |
Torque S1 Nm |
Ampere S2 |
*R.P.M. S2 *min-l |
S2 Torque Nm |
Ampere I Max |
Max Torque Nm |
Efficency % |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MR 737 H 35Q | 16 | 105 | 440 | 1 | 408 | 0,25 | 2 | 360 | 0,65 | 10 | 3,5 | 82 |
| MR 737 S 35Q | 16 | 105 | 310 | 1 | 265 | 0,43 | 1,7 | 220 | 0,85 | 5,5 | 3 | 82 |
| MR 737 L 35Q | 16 | 105 | 165 | 0,35 | 140 | 0,22 | 0,55 | 118 | 0,43 | 1,6 | 1,5 | 82 |
| MR 737 H 35Q | 64 | 114 | 110 | 1 | 102 | 0,86 | 2 | 90 | 2,1 | 10 | 12 | 73 |
| MR 737 S 35Q | 64 | 114 | 80 | 1 | 68 | 1,43 | 1,7 | 57 | 2,8 | 5,5 | 10 | 73 |
| MR 737 L 35Q | 64 | 114 | 40 | 0,35 | 35 | 0,7 | 0,55 | 28 | 1,43 | 1,6 | 5 | 73 |
| MR 737 H 35Q | 256 | 122 | 28 | 1 | 26 | 3 | 2 | 23 | 7,5 | 3,5 | 15 | 65 |
| MR 737 H 35Q L | 256 | 131 | 28 | 1 | 26 | 3 | 2,5 | 21 | 10 | 4,2 | 28 | 65 |
| MR 737 S 35Q | 256 | 122 | 20 | 1 | 17 | 5 | 1,7 | 14 | 10 | 2,4 | 15 | 65 |
| MR 737 S 35Q L | 256 | 131 | 20 | 1 | 17 | 5 | 2 | 13 | 12 | 4,5 | 28 | 65 |
| MR 737 L 35Q | 256 | 122 | 10 | 0,35 | 8 | 3 | 0,55 | 7 | 5,5 | 1,2 | 15 | 65 |
| MR 737 L 35Q L | 256 | 131 | 10 | 0,5 | 7,5 | 5 | 0,9 | 5 | 10 | 1,6 | 20 | 65 |
| MR 737 S 35Q | 1024 | 131 | 5 | 0,4 | 4,8 | 4,5 | 0,6 | 4,6 | 8,5 | 0,7 | 15 | 57 |
| MR 737 L 35Q | 1024 | 131 | 2,5 | 0,23 | 2,3 | 4,5 | 0,33 | 2,1 | 9,3 | 0,44 | 15 | 57 |
2D Drawing
