it
Download PDF catalogue
Product Description
Length "L" of the gearmotor as a function of reduction and output number of revolutions with the
standard motor 724, output 5 W, 12000 Rpm loadness, 12 or 24 Vdc. Starting current 1,6 A (3 A x 12
Vdc).
Output shaft supported by self lubrifilating bushing.
The motor’s surface is zinc plated to avoid corrosion.
The material of gearbox’s surface is delrin.
* Rpm can change of ±10%.
The test was made using a 0,85 A current with a timing 3' ON 6' OFF.
The starting current (I max) must not maintained for more than 2''.
Max load on the extremity of output shaft: Axial 2 N, Radial 10 N.
standard motor 724, output 5 W, 12000 Rpm loadness, 12 or 24 Vdc. Starting current 1,6 A (3 A x 12
Vdc).
Output shaft supported by self lubrifilating bushing.
The motor’s surface is zinc plated to avoid corrosion.
The material of gearbox’s surface is delrin.
* Rpm can change of ±10%.
The test was made using a 0,85 A current with a timing 3' ON 6' OFF.
The starting current (I max) must not maintained for more than 2''.
Max load on the extremity of output shaft: Axial 2 N, Radial 10 N.
MR 724 20
724 20
Length "L" of the gearmotor as a function of reduction and output number of revolutions with the standard motor 724, output 5 W, 12000 Rpm loadness, 12 or 24 Vdc. Starting current 1,6 A (3 A x 12 Vdc).
Datasheet
| Type |
Ratio | Lenght "L" mm |
*R.P.M. No load *min-l |
*R.P.M. S2 *min-l |
S2 Torque Nm |
Max Torque Nm |
I Max 24 Vdc |
|---|---|---|---|---|---|---|---|
| MR 724 20 1/16 | 16 | 62 | 620 | 280 | 0,11 | 0,2 | 1,6 |
| MR 724 20 1/64 | 64 | 70 | 155 | 70 | 0,44 | 0,8 | 1,6 |
| MR 724 20 1/256 | 256 | 78 | 39 | 17 | 1,2 / 0,5A | 1,5 | 0,7 |
2D Drawing
