it
Download PDF catalogue
Product Description
Length "L" of the gearmotor as a function of reduction and output number of revolution with the standard
motor 383 8 output W, 9000 Rpm loadness, 12 or 24 Vdc. Starting current 2,1 A (4 A x12Vdc).
Output shaft supported by a self lubrificating bushing.
The motor’s surface ais zinc plated to avoid corrosion.
The gearbox is die casting made.
* Rpm can change of ±10%.
The test was made using a 0,5 A current with a timing 5' ON 9' OFF.
The starting current (I max) must be maintained for more than 2".
Max load on the extremity of output shaft: Axial 2 N, Radial 10 N.
The standard motors are in conformity with CE standard.
motor 383 8 output W, 9000 Rpm loadness, 12 or 24 Vdc. Starting current 2,1 A (4 A x12Vdc).
Output shaft supported by a self lubrificating bushing.
The motor’s surface ais zinc plated to avoid corrosion.
The gearbox is die casting made.
* Rpm can change of ±10%.
The test was made using a 0,5 A current with a timing 5' ON 9' OFF.
The starting current (I max) must be maintained for more than 2".
Max load on the extremity of output shaft: Axial 2 N, Radial 10 N.
The standard motors are in conformity with CE standard.
MR 383 28
383 28
Length "L" of the gearmotor as a function of reduction and output number of revolution with the standard motor 383 8 output W, 9000 Rpm loadness, 12 or 24 Vdc. Starting current 2,1 A (4 A x12Vdc).
Datasheet
| Type |
Ratio | Lenght "L" mm |
*R.P.M. No load *min-l |
*R.P.M. S2 *min-l |
S2 Torque Nm |
Max Torque Nm |
I Max 24 Vdc |
|---|---|---|---|---|---|---|---|
| MR 383 28 1/16 | 16 | 79 | 530 | 380 | 0,21 | 0,75 | 2,1 |
| MR 383 28 1/64 | 64 | 87 | 145 | 104 | 0,67 | 2,3 | 2,1 |
| MR 383 28 1/256 | 256 | 95 | 37 | 26,5 | 2,4 | 8,5 | 2,1 |
2D Drawing
